Harlow College has published this notice through Delta eSourcing
Notice Summary |
---|
Title: | Advanced Manufacturing Center / Specialist Equipment |
Notice type: | Contract Notice |
Authority: | Harlow College |
Nature of contract: | Supplies |
Procedure: | Open |
Short Description: | Supply and commissioning of: 1 x 5axis simultaneous CNC milling machine 1 x CNC vertical milling machine 1 x CNC multi axis turning centre 1 x CNC turning centre 1 x CMM 1 x Tool setting station 20 x CNC Simulation stations An on-going development of a mutually beneficial technical partnership with the college. |
Published: | 22/02/2016 13:35 |
View Full Notice
Section I: Contracting Authority
I.1)Name, Addresses and Contact Point(s):
Harlow College
Velizy Avenue, Town Centre, Harlow, CM20 3LH, United Kingdom
Tel. +44 1279868399, Email: wallanson@harlow-college.ac.uk
Attn: Will Allanson
Further information can be obtained at: As Above
Specifications and additional documents: As Above
Tenders or requests to participate must be sent to: As Above
I.2)Type of the contracting authority:
Body governed by public law
I.3) Main activity:
Education
I.4) Contract award on behalf of other contracting authorities:
The contracting authority is purchasing on behalf of other contracting authorities: No
Section II: Object Of The Contract: SUPPLIES
II.1)Description
II.1.1)Title attributed to the contract by the contracting authority: Advanced Manufacturing Center / Specialist Equipment
II.1.2)Type of contract and location of works, place of delivery or of performance: SUPPLIES
Purchase
Region Codes: UKH3 - Essex
II.1.3) Information about a public contract, a framework or a dynamic purchasing system:The notice involves a public contract
II.1.5)Short description of the contract or purchase:
Industrial machinery. Supply and commissioning of:
1 x 5axis simultaneous CNC milling machine
1 x CNC vertical milling machine
1 x CNC multi axis turning centre
1 x CNC turning centre
1 x CMM
1 x Tool setting station
20 x CNC Simulation stations
An on-going development of a mutually beneficial technical partnership with the college.
II.1.6)Common Procurement Vocabulary:
42000000 - Industrial machinery.
II.1.7) Information about Government Procurement Agreement (GPA):
The contract is covered by the Government Procurement Agreement (GPA): Yes
II.1.8)Lots:
This contract is divided into lots: No
II.1.9)Information about variants:
Variants will be accepted: No
II.2)Quantity Or Scope Of The Contract
II.2.1)Total quantity or scope:
7 specialist items and on going technical partnership.
Estimated value excluding VAT:
Range between: 570,000 and 670,000
Currency: GBP
II.2.2)Options: No
II.2.3)Information about renewals:
This contract is subject to renewal: Not Provided
II.3)Duration Of The Contract Or Time-Limit For Completion
Starting: 01/07/2016
Completion: 23/12/2016
Information About Lots
Section III: Legal, Economic, Financial And Technical Information
III.1)Conditions relating to the contract
III.1.1)Deposits and guarantees required:
Not Provided
III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:
Not Provided
III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:
Not Provided
III.1.4)Other particular conditions:
The performance of the contract is subject to particular conditions: Not Provided
III.2)Conditions For Participation
III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers:
Not Provided
III.2.2)Economic and financial capacity
Economic and financial capacity - means of proof required:
Not Provided
III.2.3)Technical capacity
Technical capacity - means of proof required
(a) a list of the works carried out over the past five years, accompanied by certificates of satisfactory execution for the most important works. These certificates shall indicate the value, date and site of the works and shall specify whether they were carried out according to the rules of the trade and properly completed. Where appropriate, the competent authority shall submit these certificates to the contracting authority direct;
(b) a list of the principal deliveries effected or the main services provided in the past three years, with the sums, dates and recipients, whether public or private, involved. Evidence of delivery and services provided shall be given: - where the recipient was a contracting authority, in the form of certificates issued or countersigned by the competent authority, - where the recipient was a private purchaser, by the purchaser's certification or, failing this, simply by a declaration by the economic operator;
(c) an indication of the technicians or technical bodies involved, whether or not belonging directly to the economic operator's undertaking, especially those responsible for quality control and, in the case of public works contracts, those upon whom the contractor can call in order to carry out the work;
(d) a description of the technical facilities and measures used by the supplier or service provider for ensuring quality and the undertaking's study and research facilities;
(k) with regard to the products to be supplied: (i) samples, descriptions and/or photographs, the authenticity of which must be certified if the contracting authority so requests; (ii) certificates drawn up by official quality control institutes or agencies of recognised competence attesting the conformity of products clearly identified by references to specifications or standards.
III.2.4)Information about reserved contracts: Not Provided
Section IV: Procedure
IV.1)Type Of Procedure
IV.1.1)Type of procedure: Open
IV.2)Award Criteria
IV.2.1)Award criteria:
The most economically advantageous tender in terms of
The criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document
IV.2.2)Information about electronic auction:
An electronic auction will be used: No
IV.3)Administrative Information
IV.3.1)File reference number attributed by the contracting authority: Not Provided
IV.3.2)Previous publication(s) concerning the same contract: No
IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document:
Payable documents: No
IV.3.4)Time-limit for receipt of tenders or requests to participate
Date: 29/04/2016
Time: 12:00
IV.3.6)Language(s) in which tenders or requests to participate may be drawn up: English
IV.3.7)Minimum time frame during which the tenderer must maintain the tender
Until: 2016-07-29 00:00:00.0
IV.3.8)Conditions for opening tenders
Date: 02/05/2016
Time: 12:00
Persons authorised to be present at the opening of tenders: No
Section VI: Complementary Information
VI.1)This Is A Recurrent Procurement: No
VI.2)Information about European Union funds:
The contract is related to a project and/or programme financed by European Union funds: No
VI.3)Additional Information: To view this notice, please click here:
https://www.delta-esourcing.com/delta/viewNotice.html?noticeId=191581400
GO-2016222-PRO-7795295 TKR-2016222-PRO-7795294
VI.4)Procedures For Appeal
VI.4.1)Body responsible for appeal procedures:
Harlow College
Velizy Avenue, Town Centre, Harlow, CM20 3LH, United Kingdom
Tel. +44 1279868399, Email: wallanson@harlow-college.ac.uk
VI.4.2)Lodging of appeals: Not Provided
VI.4.3)Service from which information about the lodging of appeals may be obtained:
Not Provided
VI.5) Date Of Dispatch Of This Notice: 22/02/2016
ANNEX A
View any Notice Addenda
Section I: Contracting Authority
Title: UK-Harlow: Industrial machinery.
I.1)Name, Addresses And Contact Point(s)
Harlow College
Velizy Avenue, Town Centre, Harlow, CM20 3LH, United Kingdom
Tel. +44 1279868399, Email: wallanson@harlow-college.ac.uk
Attn: Will Allanson
I.2)Type Of Purchasing Body
Not Provided
Section II: Object Of The Contract
II.1)Description
II.1.1)Title attributed to the contract by the contracting authority/entity: Advanced Manufacturing Center / Specialist Equipment
II.1.2)Short description of the contract or purchase:
Industrial machinery. Supply and commissioning of:
1 x 5axis simultaneous CNC milling machine
1 x CNC vertical milling machine
1 x CNC multi axis turning centre
1 x CNC turning centre
1 x CMM
1 x Tool setting station
20 x CNC Simulation stations
An on-going development of a mutually beneficial technical partnership with the college.
II.1.3)Common procurement vocabulary:
42000000 - Industrial machinery.
Section IV: Procedure
IV.1) Type of Procedure
IV.1.1)Type of procedure (as stated in the original notice): Open
IV.2)Administrative Information
IV.2.1)File reference number attributed by the contracting authority/entity: Not Provided
IV.2.2)Notice reference for electronically submitted notice
Original Notice sent via: OJS eSender
Notice Reference: 2016 - 174042
IV.2.3)Notice to which this publication refers: Not Provided
IV.2.4)Date of dispatch of the original Notice: 22/02/2016
Section VI: Complementary Information
1: Complementary Information
VI.1)This notice involves: Additional Information
VI.3)Information to be corrected or added
VI.3.1) Modification of original information submitted by the contracting authority
VI.3.2) In the original Notice
VI.3.3)Text to be corrected in the original notice:
Place of text to be modified: additional information
Instead of: blank
Read: access codes: GCWQ36G692
VI.3.4)Dates to be corrected in the original notice: Not Provided
VI.3.5)Addresses and contact points to be corrected:
Not Provided
VI.3.6)Text to be added in the original notice: Not Provided
VI.4)Other additional information:
Please note this addendum is to advise as to the access code. Please note for full details refer to the original parent notice.
For more information about this opportunity, please visit the Delta eSourcing portal at:
https://www.delta-esourcing.com/tenders/UK-UK-Harlow:-Industrial-machinery./GCWQ36G692
To respond to this opportunity, please click here:
https://www.delta-esourcing.com/respond/GCWQ36G692
GO-2016222-PRO-7795371 TKR-2016222-PRO-7795370
VI.5)Date of dispatch: 22/02/2016